Answered By: John Kissinger
Last Updated: Sep 28, 2015     Views: 65

Wireless Configuration for Windows 8

PDF Download a copy of these instructions

  1. Go to desktop
  2. Right click on your wireless symbol in the bottom right of your screen near the clock
  3. Choose network and sharing center and you will get the window below
  4. In the window choose setup new connection or network
  5. In the next window shown below choose manually connect to a wireless network then click next
  6. In the next window put the settings exactly as shown in the image below then click next
  7. Click on Change connection settings as shown below
  8. For network properties choose WPA2-Enterprise from the first drop down box then AES from the second drop down box as shown below. Then click the “Settings” button in the center of the window
  9. In the next windows uncheck the box to “validate server certificate” as shown below then click the configure button in the center of the screen
  10. In this next window make sure the check box is not checked to automatically use windows log on then click ok then ok again
  11. When you are back to this screen click on the advanced settings button near the bottom of the widow
  12. At this window check the box to specify authentication mode and choose user authentication from the drop down box then click ok and click ok again
  13. You can then click on WAVE and try to connect. You might have to type in your credentials a couple of times before it accepts them

 

Send Us An E-Mail

Please give an e-mail address so we know where to send your answer. We will not share it.
Your Question
Your Info
Fields marked with * are required.